Custom Mat - Dahlia - Spring

Application
Suitable for indoor use – perfect in the hallway, kitchen or at the back door

Top
Soft velvet (cut pile) made of 100% polyamide

Printing technique
Printed with razor-sharp clarity using colorfast Colaris technology
– For best results: avoid prolonged exposure to bright sunlight
– Lighter colours may show dirt faster than darker shades, but are easy to clean

Bottom
Non-slip TPE backing
- Remains firmly in place
– Suitable for any floor (including PVC, cast floors and underfloor heating)
– Completely plasticizer-free – no risk of stains or sticky edges

Thickness
Approx. 5.2 mm

Pole height
Approx. 4 mm

Weight
Approx. 1800 g/m² – luxurious and sturdy

Cleaning
Wipe with a damp cloth and mild soap
Maintenance instructions are included

Origin
Made in the Netherlands, with an eye for people and the environment

Formats
Available in standard sizes and custom sizes
–Due to the production process, the size may vary slightly. If the mat really needs to fit exactly, we always recommendat least 3 centimeters extrato order.

Delivery timeEach mat is made especially for you
–Average production time: 2 weeks

Measuring instructions for your custom mat

1. Measure the space where the mat will be placed.
   Use a tape measure and measure both the length (vertical) and the width (horizontal) in several places. Floors and walls are rarely perfectly straight.
2. Note the largest measurements.
   Always choose the widest width and the longest length. Round up to the nearest whole centimeter – so 186.4 cm becomes 187 cm.
3. Please take production shrinkage into account.
   Our mats may shrink slightly during production. Therefore, we recommend ordering your mat 3 cm larger. You can easily cut it to size at home with a utility knife.
4. Recessed or loose on the floor?
   Sunk into the floor: order the mat slightly larger and trim the corners or edges yourself.
   Loose on the floor: ordering the exact size is fine. Small shrinkage won't be noticeable.
5. How is the print running?
   Our mats are always aligned with the horizontal dimension – so the print runs across the width of the mat.
   Maximum horizontal size: 1000 cm
   Maximum vertical dimension: 198 cm
   If you want the print to run lengthwise, reverse your measurements: enter the desired length as the horizontal measurement.

Larger size? Email info@studiolilaline.com